McMaster 2815A13 Jacobs Taper-Mount Keyed Drill Chuck, Number 3, for 0.04" to 1/2" Bit Shank Size, Model 14N 7473T74 7305-A01/A02 Specialty Micrometer Minimum Measurement

7305-A01/A02 Specialty Micrometer Minimum Measurement - mm 0 mm Caliper Minimum Measurement - mm 0 mm Outside Micrometer Maximum Measurement - Inch 1 in Caliper Maximum Measurement - mm 150 mm Micrometer Type Digital Outside Micrometer Inside Micrometer Minimum Measurement - Inch 0 in Outside Micrometer Minimum Measurement - Inch 0 in Caliper Resolution 0

Enclosure Cover Features Lift Off

Coefficient of Volume (Cv) 510

#2 Phillips Screwdrivers Multi Tool Series SUPER TOOL(R)300 Multi Tool Item Multi-Tool Plier Multi Tools Included Awl With Thread Loop

McMaster 2815A13 Jacobs Taper-Mount Keyed Drill Chuck, Number 3, for 0.04" to 1/2" Bit Shank Size, Model 14N 7473T74 7305-A01/A02 Specialty Micrometer Minimum MeasurementSecure bits into your drill press, milling machine, or lathe. These chucks are keyed, so they grip bits tightly to prevent slipping under heavy loads. Use the included key to tighten and loosen the jaws. Attach these chucks to your machine with a Jacobs taper arbor. To maximize grip and minimize runout, choose a chuck where your drill bit diameter falls in the middle of the bit shank size range. Jacobs Jacobs chucks are the most widely used drill